All MIBs › SEI-SMI › juiceBoxMainGlobalPortDetectionSetting
juiceBoxMainGlobalPortDetectionSetting
Module: SEI-SMI
OID (symbolic): SEI-SMI::juiceBoxMainGlobalPortDetectionSetting
OID (numeric): 1.3.6.1.4.1.20364.1.1.2.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the PortDetectionSetting for all the Juice Box ports to the selected value.
Describes the type of PD detection performed by the port. A value of disabled(1) means that no PD detection is performed. If a port currently delivering power is set to disabled(1), power will be removed from the port. A value of ieee802.3afonly(2) means only PDs with valid signatures as defined by ieee 802.3af will be detected and powered. A value of ieee8023afandlegacy(3) means that PDs with 802.3af and legacy signatures will be detected and powered. A value of forcedon(4) means the port is powered without regard to detection status. A setting of forcedon(4) is not persistent and must be re-asserted after restart/reboot
What is juiceBoxMainGlobalPortDetectionSetting?
This read-write enumerated object (disabled/ieee8023afonly/ieee8023afandlegacy/forcedon) applies the same PD detection setting to every port on the JuiceBox at once, with the same per-value behavior as the per-port juiceBoxPortDetectionSetting. An admin uses this write-only-in-effect control to bulk-configure detection mode across the whole unit instead of setting each port individually. For example, an admin writes ieee8023afandlegacy(3) here to enable both standard and legacy PD detection on every port in one operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.20364.1.1.2.9 snmpwalk -v2c -c public <target> SEI-SMI::juiceBoxMainGlobalPortDetectionSetting
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.20364.1.1.2.9.1 snmpget -v2c -c public <target> SEI-SMI::juiceBoxMainGlobalPortDetectionSetting.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.20364.1.1.2.9.1 i <value>
Start monitoring System Engineering International JuiceBox product line device (base enterprise OID registration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SEI-SMI::juiceBoxMainGlobalPortDetectionSetting OID value, configure state conditions and alerts, and monitor any System Engineering International JuiceBox product line device (base enterprise OID registration) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.20364 | sei | SEI-SMI |
| 1.3.6.1.4.1.20364.1 | juiceBoxPse | SEI-SMI |
| 1.3.6.1.4.1.20364.1.1 | juiceBoxObjects | SEI-SMI |
| 1.3.6.1.4.1.20364.1.1.2 | juiceBoxMainObjects | SEI-SMI |
| 1.3.6.1.4.1.20364.1.1.2.9 | juiceBoxMainGlobalPortDetectionSetting | SEI-SMI |