SDH-ETS-MIB :: rsTTPEOWByteLine

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSDH-ETS-MIBrsTTPEOWByteLine

rsTTPEOWByteLine

Module: SDH-ETS-MIB

OID (symbolic): SDH-ETS-MIB::rsTTPEOWByteLine

OID (numeric): 1.3.6.1.4.1.1038.110.20.2.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The line determines the SOH byte selected for Engineering Order Wire: SOH starts with 3 lines of RSOH (1,2,3) and finish with 5 lines of MSOH (5,6,7,8,9) E1 is on line 2 column 4. Zero indicates EOW not used, value different from 2 means EOW not on E1

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.110.20.2.1.12
snmpwalk -v2c -c public <target> SDH-ETS-MIB::rsTTPEOWByteLine

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.110.20.2.1.12.1
snmpget -v2c -c public <target> SDH-ETS-MIB::rsTTPEOWByteLine.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.110.20.2.1.12.1 i <value>

Start monitoring SAGEM-Tolbiac SDH transmission network-element equipment (termination-point alarm severity/loopback) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SDH-ETS-MIB::rsTTPEOWByteLine OID value, configure state conditions and alerts, and monitor any SAGEM-Tolbiac SDH transmission network-element equipment (termination-point alarm severity/loopback) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1038sagemDrSAGEM-DR-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1038.110sdhEtsSDH-ETS-MIB
1.3.6.1.4.1.1038.110.20rsTTPSDH-ETS-MIB
1.3.6.1.4.1.1038.110.20.2rsTTPTableSDH-ETS-MIB
1.3.6.1.4.1.1038.110.20.2.1rsTTPEntrySDH-ETS-MIB
1.3.6.1.4.1.1038.110.20.2.1.12rsTTPEOWByteLineSDH-ETS-MIB