All MIBs › SDH-ETS-MIB › nspiTTPLoopback
nspiTTPLoopback
Module: SDH-ETS-MIB
OID (symbolic): SDH-ETS-MIB::nspiTTPLoopback
OID (numeric): 1.3.6.1.4.1.1038.110.170.2.1.14
Node type: OBJECT-TYPE
Type: Loopback
Access: read-write
Description:
This field gives the active loopback status on the non-sdh physical port. When its value is `line' the data flow recieved from the port side is sent back to the line. When its value is `equipment' the data flow recieved form equipment side is send back. The field can be set to a particular loopback value, even if there no garantee that the loopback is really done. The real loopback status of the interface must be checked in the response. The loopback can be cleared by the equipment when it cannot remain for any reason.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.110.170.2.1.14 snmpwalk -v2c -c public <target> SDH-ETS-MIB::nspiTTPLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.110.170.2.1.14.1 snmpget -v2c -c public <target> SDH-ETS-MIB::nspiTTPLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.110.170.2.1.14.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| 1.3.6.1.4.1.1038.110 | sdhEts | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.170 | nspiTTP | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.170.2 | nspiTTPTable | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.170.2.1 | nspiTTPEntry | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.170.2.1.14 | nspiTTPLoopback | SDH-ETS-MIB |