SDH-ETS-MIB :: nspiTTPLevel

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › SDH-ETS-MIB › nspiTTPLevel

nspiTTPLevel

Module: SDH-ETS-MIB

OID (symbolic): SDH-ETS-MIB::nspiTTPLevel

OID (numeric): 1.3.6.1.4.1.1038.110.170.2.1.3

Node type: OBJECT-TYPE

Type: NspiTTPLevel

Access: read-only

Description: The rate level of the nspi interface.

What is nspiTTPLevel?

Reports the bit-rate level of this non-SDH interface, e.g. 2 Mbit/s, 10 Mbit/s, 34 Mbit/s, 45 Mbit/s, 100 Mbit/s, 140 Mbit/s, or 1 Gbit/s, so an admin can confirm the port is provisioned at the expected speed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.110.170.2.1.3
snmpwalk -v2c -c public <target> SDH-ETS-MIB::nspiTTPLevel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.110.170.2.1.3.1
snmpget -v2c -c public <target> SDH-ETS-MIB::nspiTTPLevel.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nspiTTPLevel.1

Start monitoring SAGEM-Tolbiac SDH transmission network-element equipment (termination-point alarm severity/loopback) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SDH-ETS-MIB::nspiTTPLevel OID value, configure state conditions and alerts, and monitor any SAGEM-Tolbiac SDH transmission network-element equipment (termination-point alarm severity/loopback) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1038sagemDrSAGEM-DR-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1038.110sdhEtsSDH-ETS-MIB
1.3.6.1.4.1.1038.110.170nspiTTPSDH-ETS-MIB
1.3.6.1.4.1.1038.110.170.2nspiTTPTableSDH-ETS-MIB
1.3.6.1.4.1.1038.110.170.2.1nspiTTPEntrySDH-ETS-MIB
1.3.6.1.4.1.1038.110.170.2.1.3nspiTTPLevelSDH-ETS-MIB