All MIBs › SDH-ETS-MIB › msTTPSdThreshold
msTTPSdThreshold
Module: SDH-ETS-MIB
OID (symbolic): SDH-ETS-MIB::msTTPSdThreshold
OID (numeric): 1.3.6.1.4.1.1038.110.30.2.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A Signal Degrade failure is declared if the error block rate is greater than 1E(-mstSdThreshold). The Signal Degrade failure desapeared when the error block rate is less than 1E(1 - mstSdThreshold).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.110.30.2.1.12 snmpwalk -v2c -c public <target> SDH-ETS-MIB::msTTPSdThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.110.30.2.1.12.1 snmpget -v2c -c public <target> SDH-ETS-MIB::msTTPSdThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.110.30.2.1.12.1 i <value>
Start monitoring SAGEM-Tolbiac SDH transmission network-element equipment (termination-point alarm severity/loopback) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SDH-ETS-MIB::msTTPSdThreshold OID value, configure state conditions and alerts, and monitor any SAGEM-Tolbiac SDH transmission network-element equipment (termination-point alarm severity/loopback) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.110 | sdhEts | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.30 | msTTP | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.30.2 | msTTPTable | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.30.2.1 | msTTPEntry | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.30.2.1.12 | msTTPSdThreshold | SDH-ETS-MIB |