All MIBs › SDH-ETS-MIB › msTTPEOWByteLine
msTTPEOWByteLine
Module: SDH-ETS-MIB
OID (symbolic): SDH-ETS-MIB::msTTPEOWByteLine
OID (numeric): 1.3.6.1.4.1.1038.110.30.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The line determines the SOH byte selected for Engineering Order Wire: SOH starts with 3 lines of RSOH (1,2,3) and finish with 5 lines of MSOH (5,6,7,8,9) E2 is on line 9 column 7. Zero indicates not used, value different from 9 means EOW not on E2
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.110.30.2.1.9 snmpwalk -v2c -c public <target> SDH-ETS-MIB::msTTPEOWByteLine
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.110.30.2.1.9.1 snmpget -v2c -c public <target> SDH-ETS-MIB::msTTPEOWByteLine.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.110.30.2.1.9.1 i <value>
Start monitoring SAGEM-Tolbiac SDH transmission network-element equipment (termination-point alarm severity/loopback) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SDH-ETS-MIB::msTTPEOWByteLine OID value, configure state conditions and alerts, and monitor any SAGEM-Tolbiac SDH transmission network-element equipment (termination-point alarm severity/loopback) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.110 | sdhEts | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.30 | msTTP | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.30.2 | msTTPTable | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.30.2.1 | msTTPEntry | SDH-ETS-MIB |
| 1.3.6.1.4.1.1038.110.30.2.1.9 | msTTPEOWByteLine | SDH-ETS-MIB |