All MIBs › SA-CM-MTA-MIB › saCmMtaSwUpgradeControlTimer
saCmMtaSwUpgradeControlTimer
Module: SA-CM-MTA-MIB
OID (symbolic): SA-CM-MTA-MIB::saCmMtaSwUpgradeControlTimer
OID (numeric): 1.3.6.1.4.1.1429.78.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to control the conditions for rebooting the modem following a software download: 0: Docsis Default: Always download software and reboot immediately after software download, 1: Do not download software if any phone endpoint is off hook and return 13 to docsDevSwAdminStatus when set to upgradgeFromMgt(1), other: Download software immediately but delay the reboot until all lines have been on-hook for the specified time in seconds. Note: docsDevSwOperStatus shows inProgess(1) even if the download itself has finished and MTA is waiting for user to hang up.
What is saCmMtaSwUpgradeControlTimer?
This value, in seconds, controls whether and how long the modem delays rebooting after a software download completes, based on whether phone endpoints are currently off-hook. Admins use a nonzero delay to avoid interrupting an active phone call with a disruptive reboot, letting the modem wait until all lines have been on-hook for the configured duration before rebooting. The default 0 (DOCSIS default) always downloads and reboots immediately; setting it to 300 delays the post-download reboot until all phone lines have been on-hook continuously for 5 minutes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1429.78.1.14 snmpwalk -v2c -c public <target> SA-CM-MTA-MIB::saCmMtaSwUpgradeControlTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1429.78.1.14.1 snmpget -v2c -c public <target> SA-CM-MTA-MIB::saCmMtaSwUpgradeControlTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1429.78.1.14.1 i <value>
Start monitoring Cisco/Scientific Atlanta embedded-MTA DOCSIS cable modems (voice provisioning-mode configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SA-CM-MTA-MIB::saCmMtaSwUpgradeControlTimer OID value, configure state conditions and alerts, and monitor any Cisco/Scientific Atlanta embedded-MTA DOCSIS cable modems (voice provisioning-mode configuration) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1429 | ciscoSPVTG | CISCO-DMN-DSG-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1429.78 | saVoip | SA-CM-MTA-MIB |
| 1.3.6.1.4.1.1429.78.1 | saCmMta | SA-CM-MTA-MIB |
| 1.3.6.1.4.1.1429.78.1.14 | saCmMtaSwUpgradeControlTimer | SA-CM-MTA-MIB |