S5-SWITCH-BAYSECURE-MIB :: s5SbsSecurityAction

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › S5-SWITCH-BAYSECURE-MIB › s5SbsSecurityAction

s5SbsSecurityAction

Module: S5-SWITCH-BAYSECURE-MIB

OID (symbolic): S5-SWITCH-BAYSECURE-MIB::s5SbsSecurityAction

OID (numeric): 1.3.6.1.4.1.45.1.6.5.3.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Action performed by software when a violation occurs (if s5SbsSecurityStatus is enabled). The security action specified here applies to all ports of the switch.

NOTE: da means destination address.

A blocked address will always cause the port to be partitioned when unauthorized access is attempted. See s5SbsAuthCfgAccessCtrlType for more information on allowed and blocked addresses.

What is s5SbsSecurityAction?

Sets the switch-wide response to a security violation, from no action through sending a trap, partitioning the offending port, filtering frames by destination address, or combinations of these; an admin picks partitionPortAndsendTrap or similar when they want both automatic containment and alerting on an unauthorized MAC.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.5.3.5
snmpwalk -v2c -c public <target> S5-SWITCH-BAYSECURE-MIB::s5SbsSecurityAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.5.3.5.1
snmpget -v2c -c public <target> S5-SWITCH-BAYSECURE-MIB::s5SbsSecurityAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.5.3.5.1 i <value>

Start monitoring Avaya/Nortel BayStack switches with BaySecure MAC-level port security (intrusion/violation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-SWITCH-BAYSECURE-MIB::s5SbsSecurityAction OID value, configure state conditions and alerts, and monitor any Avaya/Nortel BayStack switches with BaySecure MAC-level port security (intrusion/violation status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.45synopticsCMU-MIB
1.3.6.1.4.1.45.1productsSYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6series5000SYNOPTICS-ROOT-MIB
1.3.6.1.4.1.45.1.6.5s5ComS5-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.45.1.6.5.3s5SbsAuthS5-SWITCH-BAYSECURE-MIB
1.3.6.1.4.1.45.1.6.5.3.5s5SbsSecurityActionS5-SWITCH-BAYSECURE-MIB