All MIBs › S5-SWITCH-BAYSECURE-MIB › s5SbsAuthCfgSecureList
s5SbsAuthCfgSecureList
Module: S5-SWITCH-BAYSECURE-MIB
OID (symbolic): S5-SWITCH-BAYSECURE-MIB::s5SbsAuthCfgSecureList
OID (numeric): 1.3.6.1.4.1.45.1.6.5.3.10.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The index of the security list. This value is meaningful only if s5SbsAuthCfgBrdIndx and s5SbsAuthCfgPortIndx values are zero. For other board and port index values it should have the value of zero. This value is used as an index into s5SbsSecurityListTable. The corresponding MAC Address of this entry is allowed or blocked on all the ports of that port list. Note that this value must be 0 for entries where the value of s5SbsAuthCfgSource is either autoLearn(2) or sticky(3).
What is s5SbsAuthCfgSecureList?
Points this MAC-security entry at a named security port list (an index into s5SbsSecurityListTable) instead of a single board/port, applying the allow or block rule to every port in that list; it must be zero when board/port indexes are non-zero, and an admin uses it to apply one MAC rule across a whole group of ports at once.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.6.5.3.10.1.6 snmpwalk -v2c -c public <target> S5-SWITCH-BAYSECURE-MIB::s5SbsAuthCfgSecureList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.6.5.3.10.1.6.1 snmpget -v2c -c public <target> S5-SWITCH-BAYSECURE-MIB::s5SbsAuthCfgSecureList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.6.5.3.10.1.6.1 i <value>
Start monitoring Avaya/Nortel BayStack switches with BaySecure MAC-level port security (intrusion/violation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the S5-SWITCH-BAYSECURE-MIB::s5SbsAuthCfgSecureList OID value, configure state conditions and alerts, and monitor any Avaya/Nortel BayStack switches with BaySecure MAC-level port security (intrusion/violation status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6 | series5000 | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.1.6.5 | s5Com | S5-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.6.5.3 | s5SbsAuth | S5-SWITCH-BAYSECURE-MIB |
| 1.3.6.1.4.1.45.1.6.5.3.10 | s5SbsAuthCfgTable | S5-SWITCH-BAYSECURE-MIB |
| 1.3.6.1.4.1.45.1.6.5.3.10.1 | s5SbsAuthCfgEntry | S5-SWITCH-BAYSECURE-MIB |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.6 | s5SbsAuthCfgSecureList | S5-SWITCH-BAYSECURE-MIB |