RS-232-MIB :: rs232SyncPortRTSControl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRS-232-MIBrs232SyncPortRTSControl

rs232SyncPortRTSControl

Module: RS-232-MIB

OID (symbolic): RS-232-MIB::rs232SyncPortRTSControl

OID (numeric): 1.3.6.1.2.1.10.33.4.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The method used to control the Request To Send (RTS) signal.

controlled when the DTE is asserts RTS each time data needs to be transmitted and drops RTS at some point after data transmission begins.

If rs232SyncPortRole is 'dte', the RTS is an output signal. The device will issue a RTS and wait for a CTS from the DCE before starting to transmit.

If rs232SyncPortRole is 'dce', the RTS is an input signal. The device will issue a CTS only after having received RTS and waiting the rs232SyncPortRTSCTSDelay interval.

constant when the DTE constantly asserts RTS.

What is rs232SyncPortRTSControl?

Sets how RTS is managed on this synchronous port: controlled(1) asserts and drops RTS around each transmission (with the DCE waiting rs232SyncPortRTSCTSDelay before granting CTS), while constant(2), the default, has the DTE hold RTS asserted at all times.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.33.4.1.10
snmpwalk -v2c -c public <target> RS-232-MIB::rs232SyncPortRTSControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.33.4.1.10.1
snmpget -v2c -c public <target> RS-232-MIB::rs232SyncPortRTSControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.33.4.1.10.1 i <value>

Start monitoring vendor-neutral, standards-based MIB, routers/switches/terminal servers with serial console or modem ports with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RS-232-MIB::rs232SyncPortRTSControl OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, routers/switches/terminal servers with serial console or modem ports from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.33rs232MRVINREACH
1.3.6.1.2.1.10.33.4rs232SyncPortTableMRVINREACH
1.3.6.1.2.1.10.33.4.1rs232SyncPortEntryMRVINREACH
Numeric OIDNameModule
1.3.6.1.2.1.10.33.4.1.10rs232SyncPortRTSControlRS-232-MIB