RFC1318-MIB :: paraOutSigState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RFC1318-MIB › paraOutSigState

paraOutSigState

Module: RFC1318-MIB

OID (symbolic): RFC1318-MIB::paraOutSigState

OID (numeric): 1.3.6.1.2.1.10.34.4.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The current signal state.

What is paraOutSigState?

This read-only value reports the current state of a specific output signal this device is driving on a parallel port: none(1), on(2), or off(3). Admins check it to confirm what control signal state the device is currently asserting toward the connected printer. For example, seeing state off(3) for a row where paraOutSigName is online(2) would indicate the device is currently signaling that this port is not online.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.34.4.1.3
snmpwalk -v2c -c public <target> RFC1318-MIB::paraOutSigState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.34.4.1.3.1
snmpget -v2c -c public <target> RFC1318-MIB::paraOutSigState.1

Start monitoring vendor-neutral, standards-based MIB, print servers/devices with parallel printer ports with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1318-MIB::paraOutSigState OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, print servers/devices with parallel printer ports from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.34paraPARALLEL-MIB
1.3.6.1.2.1.10.34.4paraOutSigTablePARALLEL-MIB
1.3.6.1.2.1.10.34.4.1paraOutSigEntryPARALLEL-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.34.4.1.3paraOutSigStateRFC1318-MIB