All MIBs › RFC1285-MIB › snmpFddiSMTStationAction
snmpFddiSMTStationAction
Module: RFC1285-MIB
OID (symbolic): RFC1285-MIB::snmpFddiSMTStationAction
OID (numeric): 1.3.6.1.2.1.10.15.1.2.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows:
Other: Results in a badValue error.
Connect: Generates an SM_CM_Connect.request(connect) signal to CMT indicating that the ECM State machine is to begin a connection sequence. The fddiSMTRemoteDisconnectFlag is cleared on the setting of this variable to 1. See ANSI Ref 9.3.1.1.
Disconnect: Generates an SM_CM_Connect.request(disconnect) signal to ECM and sets the fddiSMTRemoteDisconnectFlag. See ANSI Ref 9.3.1.1.
Path-Test: Initiates a station path test. The Path_Test variable (See ANSI Ref. 9.4.1) is set to Testing. The results of this action are not specified in this standard.
Self-Test: Initiates a station self test. The results of this action are not specified in this standard.
Attempts to set this object to all other values results in a badValue error. Agents may elect to return a badValue error on attempts to set this variable to path-Test(4) or self-Test(5).
What is snmpFddiSMTStationAction?
A write-only-style control object (always reads back as other(1)) used to trigger a station-wide action: connect to the ring, disconnect from it, run a path test, or run a self-test. Admins write connect(2) to bring a disconnected station back onto the ring, or disconnect(3) to deliberately take it offline for maintenance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.15.1.2.1.19 snmpwalk -v2c -c public <target> RFC1285-MIB::snmpFddiSMTStationAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.15.1.2.1.19.1 snmpget -v2c -c public <target> RFC1285-MIB::snmpFddiSMTStationAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.15.1.2.1.19.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1285-MIB::snmpFddiSMTStationAction OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.15 | fddi | FDDI-SMT73-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.15.1 | snmpFddiSMT | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.1.2 | snmpFddiSMTTable | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.1.2.1 | snmpFddiSMTEntry | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.1.2.1.19 | snmpFddiSMTStationAction | RFC1285-MIB |