All MIBs › RFC1285-MIB › snmpFddiSMTConfigCapabilities
snmpFddiSMTConfigCapabilities
Module: RFC1285-MIB
OID (symbolic): RFC1285-MIB::snmpFddiSMTConfigCapabilities
OID (numeric): 1.3.6.1.2.1.10.15.1.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A value that indicates capabilities that are present in the node. If 'holdAvailable' is present, this indicates support of the optional Hold Function (refer to ANSI SMT 9.4.3.2). If 'CF-Wrap-AB' is present, this indicates that the WRAP_AB state is forced.
The value is a sum. This value initially takes the value zero, then for each of the configuration policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table:
Policy Power holdAvailable 0 CF-Wrap-AB 1
What is snmpFddiSMTConfigCapabilities?
A bitmask sum reporting which optional SMT configuration capabilities the node supports, such as the Hold function or a forced dual-wrap (Wrap_AB) state. Admins check this to confirm a station supports the optional recovery/hold behavior before relying on it during a ring-fault scenario.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.15.1.2.1.10 snmpwalk -v2c -c public <target> RFC1285-MIB::snmpFddiSMTConfigCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.15.1.2.1.10.1 snmpget -v2c -c public <target> RFC1285-MIB::snmpFddiSMTConfigCapabilities.1
Start monitoring vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1285-MIB::snmpFddiSMTConfigCapabilities OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.15 | fddi | FDDI-SMT73-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.15.1 | snmpFddiSMT | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.1.2 | snmpFddiSMTTable | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.1.2.1 | snmpFddiSMTEntry | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.1.2.1.10 | snmpFddiSMTConfigCapabilities | RFC1285-MIB |