All MIBs › RFC1285-MIB › snmpFddiPORTLemCts
snmpFddiPORTLemCts
Module: RFC1285-MIB
OID (symbolic): RFC1285-MIB::snmpFddiPORTLemCts
OID (numeric): 1.3.6.1.2.1.10.15.4.2.1.17
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The aggregate link error monitor error count, set
to zero only on station power_up.
What is snmpFddiPORTLemCts?
An aggregate running counter of link errors detected by this port's link error monitor, reset only on station power-up. Admins use this as a cumulative, long-term indicator of a port's physical link quality since the last reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.15.4.2.1.17 snmpwalk -v2c -c public <target> RFC1285-MIB::snmpFddiPORTLemCts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.15.4.2.1.17.1 snmpget -v2c -c public <target> RFC1285-MIB::snmpFddiPORTLemCts.1
Start monitoring vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1285-MIB::snmpFddiPORTLemCts OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.15 | fddi | FDDI-SMT73-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.15.4 | snmpFddiPORT | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.4.2 | snmpFddiPORTTable | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.4.2.1 | snmpFddiPORTEntry | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.4.2.1.17 | snmpFddiPORTLemCts | RFC1285-MIB |