RFC1285-MIB :: snmpFddiPORTConnectState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RFC1285-MIB › snmpFddiPORTConnectState

snmpFddiPORTConnectState

Module: RFC1285-MIB

OID (symbolic): RFC1285-MIB::snmpFddiPORTConnectState

OID (numeric): 1.3.6.1.2.1.10.15.4.2.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: An indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state.  The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:






  disabled: (PC0:Off, PC9:Maint)

connecting: (PC1(Break) || PC3 (Connect) || PC4
(Next)                 || PC5 (Signal) || PC6
(Join) || PC7 (Verify))             &&
(PC_Withhold = None)

   standby: (NOT PC_Withhold == None)

    active: (PC2:Trace || PC8:Active) 

What is snmpFddiPORTConnectState?

Reports a simplified, higher-level connection state for the port -- disabled, connecting, standby, or active -- derived from the underlying PCM state machine and PC-Withhold flag. Admins use this as the quick at-a-glance status field rather than having to interpret the more granular snmpFddiPORTPCMState values themselves.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.15.4.2.1.20
snmpwalk -v2c -c public <target> RFC1285-MIB::snmpFddiPORTConnectState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.15.4.2.1.20.1
snmpget -v2c -c public <target> RFC1285-MIB::snmpFddiPORTConnectState.1

Start monitoring vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1285-MIB::snmpFddiPORTConnectState OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.15fddiFDDI-SMT73-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.15.4snmpFddiPORTRFC1285-MIB
1.3.6.1.2.1.10.15.4.2snmpFddiPORTTableRFC1285-MIB
1.3.6.1.2.1.10.15.4.2.1snmpFddiPORTEntryRFC1285-MIB
1.3.6.1.2.1.10.15.4.2.1.20snmpFddiPORTConnectStateRFC1285-MIB