All MIBs › RFC1285-MIB › snmpFddiPORTAction
snmpFddiPORTAction
Module: RFC1285-MIB
OID (symbolic): RFC1285-MIB::snmpFddiPORTAction
OID (numeric): 1.3.6.1.2.1.10.15.4.2.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows:
Other: Results in a badValue error.
maintPORT: Signal PC_Maint
enablePORT: Signal PC_Enable
disablePORT: Signal PC_Disable
startPORT: Signal PC_Start
stopPORT: Signal PC_Stop
Signals cause an SM_CM_CONTROL.request service to be generated with a control_action of `Signal' and the `variable' parameter set with the appropriate value (i.e., PC_Maint, PC_Enable, PC_Disable, PC_Start, PC_Stop). Ref. ANSI SMT Section 9.3.2.
Attempts to set this object to all other values results in a badValue error.
What is snmpFddiPORTAction?
A write-only-style control object (always reads back as other(1)) used to signal a port-level action: maintenance mode, enable, disable, start, or stop. Admins write disablePORT to take a specific problem port offline, or startPORT/enablePORT to bring it back into service, without affecting the rest of the station.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.15.4.2.1.25 snmpwalk -v2c -c public <target> RFC1285-MIB::snmpFddiPORTAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.15.4.2.1.25.1 snmpget -v2c -c public <target> RFC1285-MIB::snmpFddiPORTAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.15.4.2.1.25.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1285-MIB::snmpFddiPORTAction OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.15 | fddi | FDDI-SMT73-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.15.4 | snmpFddiPORT | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.4.2 | snmpFddiPORTTable | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.4.2.1 | snmpFddiPORTEntry | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.4.2.1.25 | snmpFddiPORTAction | RFC1285-MIB |