All MIBs › RFC1285-MIB › snmpFddiMACFrameStatusCapabilities
snmpFddiMACFrameStatusCapabilities
Module: RFC1285-MIB
OID (symbolic): RFC1285-MIB::snmpFddiMACFrameStatusCapabilities
OID (numeric): 1.3.6.1.2.1.10.15.2.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A value that indicates the MAC's bridge and end- station capabilities for operating in a bridged FDDI network.
The value is a sum. This value initially takes the value zero, then for each capability present, 2 raised to a power is added to the sum. The powers are according to the following table:
Capability Power FSC-Type0 0 -- MAC repeats A/C indicators as received on -- copying with the intent to forward.
FSC-Type1 1 -- MAC sets C but not A on copying for -- forwarding.
FSC-Type2 2 -- MAC resets C and sets A on C set and -- A reset if the frame is not copied and the -- frame was addressed to this MAC
FSC-Type0-programmable 8 -- Type0 capability is programmable
FSC-Type1-programmable 9 -- Type1 capability is programmable
FSC-Type2-programmable 10 -- Type2 capability is programmable
What is snmpFddiMACFrameStatusCapabilities?
A bitmask sum reporting which frame-status-setting behaviors (the FSC-Type0/1/2 copy/forward semantics, and whether each is separately programmable) this MAC supports for bridged FDDI operation. Admins mainly need this when configuring an FDDI bridge to confirm the hardware can support the specific frame-copy/forward behavior the bridging design calls for.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.15.2.2.1.3 snmpwalk -v2c -c public <target> RFC1285-MIB::snmpFddiMACFrameStatusCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.15.2.2.1.3.1 snmpget -v2c -c public <target> RFC1285-MIB::snmpFddiMACFrameStatusCapabilities.1
Start monitoring vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1285-MIB::snmpFddiMACFrameStatusCapabilities OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.15 | fddi | FDDI-SMT73-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.15.2 | snmpFddiMAC | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.2.2 | snmpFddiMACTable | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.2.2.1 | snmpFddiMACEntry | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.2.2.1.3 | snmpFddiMACFrameStatusCapabilities | RFC1285-MIB |