All MIBs › RFC1285-MIB › snmpFddiMACFrameErrorThreshold
snmpFddiMACFrameErrorThreshold
Module: RFC1285-MIB
OID (symbolic): RFC1285-MIB::snmpFddiMACFrameErrorThreshold
OID (numeric): 1.3.6.1.2.1.10.15.2.2.1.23
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A threshold for determining when a MAC Condition report should be generated. The condition is true when the ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt + delta snmpFddiMACLostCt)) x 2**16. exceeds the threshold. It is used to determine when a station has an unacceptable frame error threshold. The sampling algorithm is implementation dependent. Any attempt to set this variable to a value of less than one shall result in a badValue error. Those who are familiar with the SNMP management framework will recognize that thresholds are not in keeping with the SNMP philosophy. However, this variable is supported by underlying SMT implementations already and maintaining this threshold should not pose an undue additional burden on SNMP agent implementors.
What is snmpFddiMACFrameErrorThreshold?
Sets the threshold, on a 0-65535 scale representing the frame error ratio times 2^16, above which the station should raise a MAC Condition report. Admins tune this threshold to control how sensitive the ring is to reporting quality degradation, balancing early warning against nuisance alerts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.15.2.2.1.23 snmpwalk -v2c -c public <target> RFC1285-MIB::snmpFddiMACFrameErrorThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.15.2.2.1.23.1 snmpget -v2c -c public <target> RFC1285-MIB::snmpFddiMACFrameErrorThreshold.1
Start monitoring vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1285-MIB::snmpFddiMACFrameErrorThreshold OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.15 | fddi | FDDI-SMT73-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.15.2 | snmpFddiMAC | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.2.2 | snmpFddiMACTable | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.2.2.1 | snmpFddiMACEntry | RFC1285-MIB |
| 1.3.6.1.2.1.10.15.2.2.1.23 | snmpFddiMACFrameErrorThreshold | RFC1285-MIB |