RFC1285-MIB :: snmpFddiMACCurrentFrameStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RFC1285-MIB › snmpFddiMACCurrentFrameStatus

snmpFddiMACCurrentFrameStatus

Module: RFC1285-MIB

OID (symbolic): RFC1285-MIB::snmpFddiMACCurrentFrameStatus

OID (numeric): 1.3.6.1.2.1.10.15.2.2.1.19

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: A value that indicates the MAC's operational frame status setting functionality.

The value is a sum. This value initially takes the value zero, then for each functionality present, 2 raised to a power is added to the sum. The powers are according to the following table:

Functionality Power FSC-Type0 0 -- MAC repeats A/C indicators as received

FSC-Type1 1 -- MAC sets C but not A on copying for -- forwarding

FSC-Type2 2 -- MAC resets C and sets A on C set and A -- reset if frame is not copied

What is snmpFddiMACCurrentFrameStatus?

A read-write bitmask sum reporting (and letting an admin set) this MAC's currently active frame-status-setting behavior out of the FSC-Type0/1/2 options. Admins would adjust this when a bridging configuration requires a specific frame-copy/forward semantic to interoperate correctly with other bridges on the ring.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.15.2.2.1.19
snmpwalk -v2c -c public <target> RFC1285-MIB::snmpFddiMACCurrentFrameStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.15.2.2.1.19.1
snmpget -v2c -c public <target> RFC1285-MIB::snmpFddiMACCurrentFrameStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.15.2.2.1.19.1 i <value>

Start monitoring vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1285-MIB::snmpFddiMACCurrentFrameStatus OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, FDDI ring stations, concentrators, and router FDDI interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.15fddiFDDI-SMT73-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.15.2snmpFddiMACRFC1285-MIB
1.3.6.1.2.1.10.15.2.2snmpFddiMACTableRFC1285-MIB
1.3.6.1.2.1.10.15.2.2.1snmpFddiMACEntryRFC1285-MIB
1.3.6.1.2.1.10.15.2.2.1.19snmpFddiMACCurrentFrameStatusRFC1285-MIB