RFC1232-MIB :: ds1ValidIntervals

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RFC1232-MIB › ds1ValidIntervals

ds1ValidIntervals

Module: RFC1232-MIB

OID (symbolic): RFC1232-MIB::ds1ValidIntervals

OID (numeric): 1.3.6.1.2.1.10.18.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The number of previous intervals for which valid data was collected. The value will be 96 unless the CSU device was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the CSU has been online.

What is ds1ValidIntervals?

The number of the previous 96 fifteen-minute intervals that contain valid collected data; a value less than 96 typically means the CSU has been online for under 24 hours.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.1.1.4
snmpwalk -v2c -c public <target> RFC1232-MIB::ds1ValidIntervals

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.1.1.4.1
snmpget -v2c -c public <target> RFC1232-MIB::ds1ValidIntervals.1

Start monitoring vendor-neutral, standards-based MIB, WAN routers and CSU/DSU equipment with T1/E1 interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1232-MIB::ds1ValidIntervals OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, WAN routers and CSU/DSU equipment with T1/E1 interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.18ds1DS1-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.18.1ds1ConfigTableRFC1232-MIB
1.3.6.1.2.1.10.18.1.1ds1ConfigEntryRFC1232-MIB
1.3.6.1.2.1.10.18.1.1.4ds1ValidIntervalsRFC1232-MIB