All MIBs › RFC1232-MIB › ds1RedAlarm
ds1RedAlarm
Module: RFC1232-MIB
OID (symbolic): RFC1232-MIB::ds1RedAlarm
OID (numeric): 1.3.6.1.2.1.10.18.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This variable indicates if a Red Alarm condition exists.
Note that G.704 interfaces do not support Red Alarms. Accordingly, such agents should return the value ds1NoRedAlarm.
What is ds1RedAlarm?
Indicates whether the DS1 circuit is currently reporting a Red Alarm (loss of frame synchronization); G.704 interfaces don't support this alarm type and will always report ds1NoRedAlarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.1.1.10 snmpwalk -v2c -c public <target> RFC1232-MIB::ds1RedAlarm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.1.1.10.1 snmpget -v2c -c public <target> RFC1232-MIB::ds1RedAlarm.1
Start monitoring vendor-neutral, standards-based MIB, WAN routers and CSU/DSU equipment with T1/E1 interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1232-MIB::ds1RedAlarm OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, WAN routers and CSU/DSU equipment with T1/E1 interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.18 | ds1 | DS1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.18.1 | ds1ConfigTable | RFC1232-MIB |
| 1.3.6.1.2.1.10.18.1.1 | ds1ConfigEntry | RFC1232-MIB |
| 1.3.6.1.2.1.10.18.1.1.10 | ds1RedAlarm | RFC1232-MIB |