All MIBs › RFC1232-MIB › ds1Loopback
ds1Loopback
Module: RFC1232-MIB
OID (symbolic): RFC1232-MIB::ds1Loopback
OID (numeric): 1.3.6.1.2.1.10.18.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This variable represents the loopback state of the CSU. Devices supporting read/write access should return badValue in response to a requested loopback state that the CSU does not support. The values mean:
ds1NoLoop
Not in the loopback state. A device that is not capable of performing a loopback on either interface shall always return this as it's value.
ds1LocalLoopbackLocalSide
Signal received from the local side of the device is looped back at the local connector (eg, without involving the CSU).
ds1LocalLoopbackRemoteSide
Signal received from the local side of the device is looped back at the remote connector (eg, through the CSU).
ds1RemoteLoopbackLocalSide
Signal received from the remote side of the device is looped back at the local connector (eg, through the CSU).
ds1RemoteLoopbackRemoteSide
Signal received from the remote side of the device is looped back at the remote connector (eg, without involving the CSU).
What is ds1Loopback?
Reports the current loopback state of the CSU, such as looping the local signal back locally or through the remote unit; a device that cannot loop always reports ds1NoLoop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.18.1.1.7 snmpwalk -v2c -c public <target> RFC1232-MIB::ds1Loopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.18.1.1.7.1 snmpget -v2c -c public <target> RFC1232-MIB::ds1Loopback.1
Start monitoring vendor-neutral, standards-based MIB, WAN routers and CSU/DSU equipment with T1/E1 interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1232-MIB::ds1Loopback OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, WAN routers and CSU/DSU equipment with T1/E1 interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.18 | ds1 | DS1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.18.1 | ds1ConfigTable | RFC1232-MIB |
| 1.3.6.1.2.1.10.18.1.1 | ds1ConfigEntry | RFC1232-MIB |
| 1.3.6.1.2.1.10.18.1.1.7 | ds1Loopback | RFC1232-MIB |