All MIBs › RFC1230-MIB › dot4InitInRingDesired
dot4InitInRingDesired
Module: RFC1230-MIB
OID (symbolic): RFC1230-MIB::dot4InitInRingDesired
OID (numeric): 1.3.6.1.2.1.10.8.2.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object determines whether the station will attempt to enter the logical ring immediately after initialization.
What is dot4InitInRingDesired?
Determines whether the station automatically tries to enter the logical ring right after initialization (inRing) or stays out of the ring until told otherwise (outOfRing); an admin sets this before triggering the initialize(5) command via dot4Commands.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.8.2.1.12 snmpwalk -v2c -c public <target> RFC1230-MIB::dot4InitInRingDesired
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.8.2.1.12.1 snmpget -v2c -c public <target> RFC1230-MIB::dot4InitInRingDesired.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.8.2.1.12.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, legacy IEEE 802.4 Token Bus network adapters (obsolete) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1230-MIB::dot4InitInRingDesired OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, legacy IEEE 802.4 Token Bus network adapters (obsolete) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.8 | dot4 | RFC1230-MIB |
| 1.3.6.1.2.1.10.8.2 | dot4InitTable | RFC1230-MIB |
| 1.3.6.1.2.1.10.8.2.1 | dot4InitEntry | RFC1230-MIB |
| 1.3.6.1.2.1.10.8.2.1.12 | dot4InitInRingDesired | RFC1230-MIB |