All MIBs › RFC1230-MIB › dot4Commands
dot4Commands
Module: RFC1230-MIB
OID (symbolic): RFC1230-MIB::dot4Commands
OID (numeric): 1.3.6.1.2.1.10.8.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object causes the station to change the state of the interface as indicated by the specified value. An initialize(5) command causes the interfaceto load its operational parameters from its initialization parameters; the value of dot4InitInRingDesired determines whether the station tries to enter the logical ring immediately. Note that the 802.4 specification suggests a station remain Offline after a 'remote Network Management' reset(4), until a 'local Network Management' initialize(5) is performed. Setting this object to a value of no-op(1) has no effect. When read, this object always has the value no-op(1).
What is dot4Commands?
Lets an admin change the interface's ring state by writing enterRing, exitRing, reset, or initialize; initialize reloads the station's operational parameters from its configured init values, while reset leaves the station offline until a subsequent initialize is issued, and reading this object always returns no-op(1) regardless of the last command sent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.8.1.1.4 snmpwalk -v2c -c public <target> RFC1230-MIB::dot4Commands
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.8.1.1.4.1 snmpget -v2c -c public <target> RFC1230-MIB::dot4Commands.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.8.1.1.4.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, legacy IEEE 802.4 Token Bus network adapters (obsolete) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1230-MIB::dot4Commands OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, legacy IEEE 802.4 Token Bus network adapters (obsolete) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.8 | dot4 | RFC1230-MIB |
| 1.3.6.1.2.1.10.8.1 | dot4Table | RFC1230-MIB |
| 1.3.6.1.2.1.10.8.1.1 | dot4Entry | RFC1230-MIB |
| 1.3.6.1.2.1.10.8.1.1.4 | dot4Commands | RFC1230-MIB |