Description: When using this rule set, the load balancing algorithm is based on upstream and downstream utilization by the values upstream(1) and downstream(2) respectively. Additionally, a Load Balancing groups interval can be defined by value interval(3). Upstream Load Balancing during modem registration can be enabled by value registration(4). Load Balancing after a resource failure due to a DSX from a CPE can be enabled by value rem-dsx(5). Load balancing triggered by a Spectrum Management bit rate change can be enabled by value spec-trig(6). Downstream Load Balancing during modem registration can be enabled by value ds-reg(7). Upstream Load Balancing with Bonding Groups during modem registration can be enabled by value us-reg-bonding(8). Downstream Load Balancing with Bonding Groups during modem registration can be enabled by value ds-reg-bonding(9). The load balancing utilization thresholds are defined by the objects rdnLoadBalBasicRuleMinThres, rdnLoadBalBasicRuleDeltaThres and rdnLoadBalBasicRuleStopThres objects if this object value is set to upstream(1) or downstream(2). The modem count threshold is defined by the object rdnLoadBalBasicRuleModemCountThres if this object value is set to registration(4), ds-reg(7), us-reg-bonding(8), or ds-reg-bonding(9).