RCV3 :: rc3TrapRcvrComm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RCV3 › rc3TrapRcvrComm

rc3TrapRcvrComm

Module: RCV3

OID (symbolic): RCV3::rc3TrapRcvrComm

OID (numeric): 1.3.6.1.4.1.1958.1.1.8.5.3.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Community string used by SNMP Manager.

What is rc3TrapRcvrComm?

Sets the community string this device includes when sending SNMP traps to a specific trap-receiver entry, which the receiving manager may check to validate the trap's origin.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.5.3.1.2
snmpwalk -v2c -c public <target> RCV3::rc3TrapRcvrComm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.5.3.1.2.1
snmpget -v2c -c public <target> RCV3::rc3TrapRcvrComm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.5.3.1.2.1 s <value>

Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3TrapRcvrComm OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1958redCreekRCV3
1.3.6.1.4.1.1958.1productsRCV3
1.3.6.1.4.1.1958.1.1rcRavlinRCV3
1.3.6.1.4.1.1958.1.1.8rcMgmtRCV3
1.3.6.1.4.1.1958.1.1.8.5rc3SnmpRCV3
1.3.6.1.4.1.1958.1.1.8.5.3rc3TrapRcvrTableRCV3
1.3.6.1.4.1.1958.1.1.8.5.3.1rc3TrapRcvrEntryRCV3
1.3.6.1.4.1.1958.1.1.8.5.3.1.2rc3TrapRcvrCommRCV3