All MIBs › RCV3 › rc3SysPerfTrapThreshold
rc3SysPerfTrapThreshold
Module: RCV3
OID (symbolic): RCV3::rc3SysPerfTrapThreshold
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.3.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the threshold of packet loss below which a warning trap will be generated. This threshold is measured in percentage of packets sent versus packets received.
What is rc3SysPerfTrapThreshold?
Sets the packet-loss percentage threshold below which the device generates a warning trap, measured as packets received versus packets sent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.12 snmpwalk -v2c -c public <target> RCV3::rc3SysPerfTrapThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.12.1 snmpget -v2c -c public <target> RCV3::rc3SysPerfTrapThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.3.12.1 i <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3SysPerfTrapThreshold OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3 | rc3Control | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3.12 | rc3SysPerfTrapThreshold | RCV3 |