All MIBs › RCV3 › rc3SysPerfTimeBetweenReports
rc3SysPerfTimeBetweenReports
Module: RCV3
OID (symbolic): RCV3::rc3SysPerfTimeBetweenReports
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.3.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Time in seconds after which reporting will occur.
What is rc3SysPerfTimeBetweenReports?
Sets how often, in seconds, the device reports collected system performance data (e.g. via trap or log), separate from how often it polls that data in rc3SysPerfTimeBetweenPolls.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.11 snmpwalk -v2c -c public <target> RCV3::rc3SysPerfTimeBetweenReports
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.11.1 snmpget -v2c -c public <target> RCV3::rc3SysPerfTimeBetweenReports.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.3.11.1 i <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3SysPerfTimeBetweenReports OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3 | rc3Control | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3.11 | rc3SysPerfTimeBetweenReports | RCV3 |