rc3Reset
Module: RCV3
OID (symbolic): RCV3::rc3Reset
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Action object to do the following:
warmstart - Reboots the device. Firmware and configuration information is maintained.
clearallactiveSA - All active SA entries are removed.
clearARPcache - All entries in the ARP cache are removed.
clearmessagetable - All entries in the status message table will be removed.
resettodefaults - IP address and subnet mask are maintained. All other configuration information is removed. Firmware is maintained.
resettofactorydefaults - All configuration information is removed. Firmware is maintained.
eraseflash - Firmware is removed and the device will be in BOOT ROM mode. Configuration information is maintained.
disablebox - Delete Box's manufactured certificate and private key. ** ** WARNING: this function will render the Ravlin box useless. ** Use only when device is no longer required to be in service FOREVER. **
What is rc3Reset?
An action object an admin writes to trigger device-level operations: warmstart to reboot while keeping firmware and config, clearallactiveSA to drop active security associations, clearARPcache, clearmessagetable, resettodefaults (keeps IP/mask and firmware, clears the rest), resettofactorydefaults, eraseflash (removes firmware, leaves config), or disablebox, which permanently deletes the device's manufactured certificate and private key and renders it unusable — the source DESCRIPTION explicitly warns this option should only be used when the device is being permanently retired.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.1 snmpwalk -v2c -c public <target> RCV3::rc3Reset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.1.1 snmpget -v2c -c public <target> RCV3::rc3Reset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.3.1.1 i <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3Reset OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3 | rc3Control | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3.1 | rc3Reset | RCV3 |