All MIBs › RCV3 › rc3RadiusPriority
rc3RadiusPriority
Module: RCV3
OID (symbolic): RCV3::rc3RadiusPriority
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.6.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Specify the priority of the Radius servers in the table. Each octet will specify one of the entries in order of preference.
What is rc3RadiusPriority?
Sets the preference order of RADIUS servers in the table as a short byte string, where each octet identifies one server entry in the order it should be tried.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.6.3 snmpwalk -v2c -c public <target> RCV3::rc3RadiusPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.6.3.1 snmpget -v2c -c public <target> RCV3::rc3RadiusPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.6.3.1 s <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3RadiusPriority OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.6 | rc3ClientCfg | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.6.3 | rc3RadiusPriority | RCV3 |