All MIBs › RCV3 › rc3PdeManualOutboundAuthKeyFips
rc3PdeManualOutboundAuthKeyFips
Module: RCV3
OID (symbolic): RCV3::rc3PdeManualOutboundAuthKeyFips
OID (numeric): 1.3.6.1.4.1.1958.1.1.9.2.5.1.12
Node type: OBJECT-TYPE
Type: PbeShaEncryptedObject
Access: read-write
Description: Available for release 3.30 and up. Object used to set manual inbound authentication key. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. If the manual inbound authentication key exists, then on read a dummy string is returned. manual outbound authentication key length is (0..20)
What is rc3PdeManualOutboundAuthKeyFips?
A FIPS-mode replacement (firmware 3.30+) for setting the manual outbound IPsec authentication key (0-20 bytes), using the PbeShaEncryptedObject convention. If a key already exists, reading this object returns a dummy placeholder rather than the real key. Note: the source DESCRIPTION text mislabels this as an "inbound" key in its first two lines despite the object's own name and the final line both correctly saying "outbound" — the object name is the reliable signal here.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.9.2.5.1.12 snmpwalk -v2c -c public <target> RCV3::rc3PdeManualOutboundAuthKeyFips
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.9.2.5.1.12.1 snmpget -v2c -c public <target> RCV3::rc3PdeManualOutboundAuthKeyFips.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.9.2.5.1.12.1 s <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3PdeManualOutboundAuthKeyFips OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.9 | rcPolicy | RCV3 |
| 1.3.6.1.4.1.1958.1.1.9.2 | rc3Pde | RCV3 |
| 1.3.6.1.4.1.1958.1.1.9.2.5 | rc3PdeManualKeyMgmtTable | RCV3 |
| 1.3.6.1.4.1.1958.1.1.9.2.5.1 | rc3PdeManualKeyMgmtEntry | RCV3 |
| 1.3.6.1.4.1.1958.1.1.9.2.5.1.12 | rc3PdeManualOutboundAuthKeyFips | RCV3 |