RCV3 :: rc3PdeManualInboundAuthKeyFips

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RCV3 › rc3PdeManualInboundAuthKeyFips

rc3PdeManualInboundAuthKeyFips

Module: RCV3

OID (symbolic): RCV3::rc3PdeManualInboundAuthKeyFips

OID (numeric): 1.3.6.1.4.1.1958.1.1.9.2.5.1.11

Node type: OBJECT-TYPE

Type: PbeShaEncryptedObject

Access: read-write

Description: Available for release 3.30 and up. Object used to set manual inbound authentication key. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. If the manual inbound authentication key exists, then on read a dummy string is returned. manual inbound authentication key length is (0..20)

What is rc3PdeManualInboundAuthKeyFips?

A FIPS-mode replacement (firmware 3.30+) for setting the manual inbound IPsec authentication key (0-20 bytes), using the PbeShaEncryptedObject convention. If a key already exists, reading this object returns a dummy placeholder rather than the real key.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.9.2.5.1.11
snmpwalk -v2c -c public <target> RCV3::rc3PdeManualInboundAuthKeyFips

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.9.2.5.1.11.1
snmpget -v2c -c public <target> RCV3::rc3PdeManualInboundAuthKeyFips.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.9.2.5.1.11.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rc3PdeManualInboundAuthKeyFips.1

Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3PdeManualInboundAuthKeyFips OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1958redCreekRCV3
1.3.6.1.4.1.1958.1productsRCV3
1.3.6.1.4.1.1958.1.1rcRavlinRCV3
1.3.6.1.4.1.1958.1.1.9rcPolicyRCV3
1.3.6.1.4.1.1958.1.1.9.2rc3PdeRCV3
1.3.6.1.4.1.1958.1.1.9.2.5rc3PdeManualKeyMgmtTableRCV3
1.3.6.1.4.1.1958.1.1.9.2.5.1rc3PdeManualKeyMgmtEntryRCV3
1.3.6.1.4.1.1958.1.1.9.2.5.1.11rc3PdeManualInboundAuthKeyFipsRCV3