All MIBs › RCV3 › rc3PPPoEIdleTimeout
rc3PPPoEIdleTimeout
Module: RCV3
OID (symbolic): RCV3::rc3PPPoEIdleTimeout
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.2.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The duration in minutes to timeout PPPoE connection when there is no traffic.Default is 10 minutes.
What is rc3PPPoEIdleTimeout?
Sets how many minutes of no traffic are allowed before the device tears down an idle PPPoE connection; defaults to 10 minutes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.8 snmpwalk -v2c -c public <target> RCV3::rc3PPPoEIdleTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.8.1 snmpget -v2c -c public <target> RCV3::rc3PPPoEIdleTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.2.8.1 i <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3PPPoEIdleTimeout OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.2 | rc3Network | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.2.8 | rc3PPPoEIdleTimeout | RCV3 |