All MIBs › RCV3 › rc3PPPoEDnsServer2
rc3PPPoEDnsServer2
Module: RCV3
OID (symbolic): RCV3::rc3PPPoEDnsServer2
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.2.11
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: IP address of DNS server1. When Ravlin is enabled to get its remote interface attributes via PPPoE, it will also provide DNS server IP address. This is a read-only attribute, the user can use to setup his end host.
What is rc3PPPoEDnsServer2?
Reports the secondary DNS server IP address supplied via PPPoE, alongside rc3PPPoEDnsServer1, for use when configuring downstream hosts' DNS settings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.11 snmpwalk -v2c -c public <target> RCV3::rc3PPPoEDnsServer2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.11.1 snmpget -v2c -c public <target> RCV3::rc3PPPoEDnsServer2.1
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3PPPoEDnsServer2 OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.2 | rc3Network | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.2.11 | rc3PPPoEDnsServer2 | RCV3 |