RCV3 :: rc3IpRouteProto

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RCV3 › rc3IpRouteProto

rc3IpRouteProto

Module: RCV3

OID (symbolic): RCV3::rc3IpRouteProto

OID (numeric): 1.3.6.1.4.1.1958.1.1.8.2.2.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The routing mechanism via which this route was learned.

What is rc3IpRouteProto?

Indicates how this route was learned: manually configured (other/local), via a management protocol, via ICMP redirect, or via a gateway routing protocol such as RIP, OSPF, BGP, or IS-IS, among others listed in the enumeration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.2.1.6
snmpwalk -v2c -c public <target> RCV3::rc3IpRouteProto

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.2.1.6.1
snmpget -v2c -c public <target> RCV3::rc3IpRouteProto.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.2.2.1.6.1 i <value>

Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3IpRouteProto OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1958redCreekRCV3
1.3.6.1.4.1.1958.1productsRCV3
1.3.6.1.4.1.1958.1.1rcRavlinRCV3
1.3.6.1.4.1.1958.1.1.8rcMgmtRCV3
1.3.6.1.4.1.1958.1.1.8.2rc3NetworkRCV3
1.3.6.1.4.1.1958.1.1.8.2.2rc3IpRouteTableRCV3
1.3.6.1.4.1.1958.1.1.8.2.2.1rc3IpRouteEntryRCV3
1.3.6.1.4.1.1958.1.1.8.2.2.1.6rc3IpRouteProtoRCV3