RCV3 :: rc3IpRouteIfIndex

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RCV3 › rc3IpRouteIfIndex

rc3IpRouteIfIndex

Module: RCV3

OID (symbolic): RCV3::rc3IpRouteIfIndex

OID (numeric): 1.3.6.1.4.1.1958.1.1.8.2.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The index value which uniquely identifies the local interface through which the next hop of this route should be reached.

What is rc3IpRouteIfIndex?

Identifies the local network interface through which packets for this route are forwarded to reach the configured next hop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.2.1.3
snmpwalk -v2c -c public <target> RCV3::rc3IpRouteIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.2.1.3.1
snmpget -v2c -c public <target> RCV3::rc3IpRouteIfIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.2.2.1.3.1 i <value>

Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3IpRouteIfIndex OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1958redCreekRCV3
1.3.6.1.4.1.1958.1productsRCV3
1.3.6.1.4.1.1958.1.1rcRavlinRCV3
1.3.6.1.4.1.1958.1.1.8rcMgmtRCV3
1.3.6.1.4.1.1958.1.1.8.2rc3NetworkRCV3
1.3.6.1.4.1.1958.1.1.8.2.2rc3IpRouteTableRCV3
1.3.6.1.4.1.1958.1.1.8.2.2.1rc3IpRouteEntryRCV3
1.3.6.1.4.1.1958.1.1.8.2.2.1.3rc3IpRouteIfIndexRCV3