All MIBs › RCV3 › rc3InterfaceIp
rc3InterfaceIp
Module: RCV3
OID (symbolic): RCV3::rc3InterfaceIp
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.2.1.1.2
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The interface's address at the network layer in the protocol stack.
What is rc3InterfaceIp?
Sets the IP address assigned to this network interface of the Ravlin device, one row per interface in the interface table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.1.1.2 snmpwalk -v2c -c public <target> RCV3::rc3InterfaceIp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.2.1.1.2.1 snmpget -v2c -c public <target> RCV3::rc3InterfaceIp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.2.1.1.2.1 a <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3InterfaceIp OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.2 | rc3Network | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.2.1 | rc3InterfaceTable | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.2.1.1 | rc3InterfaceEntry | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.2.1.1.2 | rc3InterfaceIp | RCV3 |