All MIBs › RCV3 › rc3InactiveClientTimeout
rc3InactiveClientTimeout
Module: RCV3
OID (symbolic): RCV3::rc3InactiveClientTimeout
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.3.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The duration in minutes to tear down the SA between the RavSoft client and Ravlin server.
What is rc3InactiveClientTimeout?
Sets how many minutes of inactivity are allowed before the device tears down the secure association (SA) between a RavSoft VPN client and this Ravlin server.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.5 snmpwalk -v2c -c public <target> RCV3::rc3InactiveClientTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.5.1 snmpget -v2c -c public <target> RCV3::rc3InactiveClientTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.3.5.1 i <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3InactiveClientTimeout OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3 | rc3Control | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3.5 | rc3InactiveClientTimeout | RCV3 |