All MIBs › RCV3 › rc3DHCPRelayIpAddr
rc3DHCPRelayIpAddr
Module: RCV3
OID (symbolic): RCV3::rc3DHCPRelayIpAddr
OID (numeric): 1.3.6.1.4.1.1958.1.1.8.3.9
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: IP Address to be used for DHCP Relay. This is used when the Ravlin unit redeives a DHCP request from the Ravsoft client.
What is rc3DHCPRelayIpAddr?
Sets the IP address used for DHCP relay when the Ravlin unit receives a DHCP request forwarded from a RavSoft client, so that request can be relayed to the real DHCP server.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.9 snmpwalk -v2c -c public <target> RCV3::rc3DHCPRelayIpAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.3.9.1 snmpget -v2c -c public <target> RCV3::rc3DHCPRelayIpAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.3.9.1 a <value>
Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3DHCPRelayIpAddr OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1958 | redCreek | RCV3 |
| 1.3.6.1.4.1.1958.1 | products | RCV3 |
| 1.3.6.1.4.1.1958.1.1 | rcRavlin | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8 | rcMgmt | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3 | rc3Control | RCV3 |
| 1.3.6.1.4.1.1958.1.1.8.3.9 | rc3DHCPRelayIpAddr | RCV3 |