RCV3 :: rc3CACertStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RCV3 › rc3CACertStatus

rc3CACertStatus

Module: RCV3

OID (symbolic): RCV3::rc3CACertStatus

OID (numeric): 1.3.6.1.4.1.1958.1.1.8.9.1.1.4

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-write

Description: This object is used to create/delete rows from the CA Certificate Table. See the definition for RowStatus for a range of valid values used.

What is rc3CACertStatus?

Standard RowStatus control column used to create or delete rows in the CA certificate table via SNMP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.9.1.1.4
snmpwalk -v2c -c public <target> RCV3::rc3CACertStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1958.1.1.8.9.1.1.4.1
snmpget -v2c -c public <target> RCV3::rc3CACertStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1958.1.1.8.9.1.1.4.1 s <value>

Start monitoring RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RCV3::rc3CACertStatus OID value, configure state conditions and alerts, and monitor any RedCreek Communications VPN/routing gateway (firmware/hardware version and basic IP/interface config) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1958redCreekRCV3
1.3.6.1.4.1.1958.1productsRCV3
1.3.6.1.4.1.1958.1.1rcRavlinRCV3
1.3.6.1.4.1.1958.1.1.8rcMgmtRCV3
1.3.6.1.4.1.1958.1.1.8.9rc3CertRCV3
1.3.6.1.4.1.1958.1.1.8.9.1rc3CACertTableRCV3
1.3.6.1.4.1.1958.1.1.8.9.1.1rc3CACertEntryRCV3
1.3.6.1.4.1.1958.1.1.8.9.1.1.4rc3CACertStatusRCV3