All MIBs › RAISECOM-NAT-MIB › natUdpSessionMaxIdleTime
natUdpSessionMaxIdleTime
Module: RAISECOM-NAT-MIB
OID (symbolic): RAISECOM-NAT-MIB::natUdpSessionMaxIdleTime
OID (numeric): 1.3.6.1.4.1.8886.15.1.1.1.6.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
All sessions are associated with a session-idle timeout. When this timeout expires if the session is idle, the corresponding entry in the session table is deleted.
This parameter defines the value in seconds for the UDP session-idle timeout loaded when the session itself is detected on the NAT device.
Changing this parameter only affects UDP sessions detected at a later time.
This parameter is only significant when the device operates in NAPT mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.15.1.1.1.6.1.18 snmpwalk -v2c -c public <target> RAISECOM-NAT-MIB::natUdpSessionMaxIdleTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.15.1.1.1.6.1.18.1 snmpget -v2c -c public <target> RAISECOM-NAT-MIB::natUdpSessionMaxIdleTime.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.15 | raisecomOptSysCommon | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.15.1 | optSysMgmt | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.15.1.1 | raisecomNatMIB | RAISECOM-NAT-MIB |
| 1.3.6.1.4.1.8886.15.1.1.1 | natDesc | RAISECOM-NAT-MIB |
| 1.3.6.1.4.1.8886.15.1.1.1.6 | natTable | RAISECOM-NAT-MIB |
| 1.3.6.1.4.1.8886.15.1.1.1.6.1 | natEntry | RAISECOM-NAT-MIB |
| 1.3.6.1.4.1.8886.15.1.1.1.6.1.18 | natUdpSessionMaxIdleTime | RAISECOM-NAT-MIB |