RAISECOM-NAT-MIB :: natTypeMask

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRAISECOM-NAT-MIBnatTypeMask

natTypeMask

Module: RAISECOM-NAT-MIB

OID (symbolic): RAISECOM-NAT-MIB::natTypeMask

OID (numeric): 1.3.6.1.4.1.8886.15.1.1.1.6.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: A Bit Mask documenting the NAT types as defined in RFC 2663 this NAT instance supports.

Its value may be any combination of the options below: Basic-NAT(Bit 0) NAPT(Bit 1) Bi-directional-NAT(Bit 2) Twice-NAT(Bit 3) RSA-IP-Server(Bit 4) RSAP-IP-Server(Bit 5)

Bit 0, if set, indicates that Basic-NAT is supported. Bit 1, if set, indicates that NAPT is supported. Bit 2, if set, indicates that Bi-directional-NAT is supported. Bit 3, if set, indicates that Twice-NAT is supported. Bit 4, if set, indicates that RSA-IP-Server is supported. Bit 5, if set, indicates that RSAP-IP-Server is supported.

What is natTypeMask?

A deprecated bit mask (per RFC 2663) showing which NAT modes this instance is capable of supporting, e.g. Basic-NAT (bit 0), NAPT (bit 1), Bi-directional-NAT (bit 2), Twice-NAT (bit 3), RSA-IP-Server (bit 4), or RSAP-IP-Server (bit 5). It describes capability, not the currently active mode, which is reported instead in natType.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.15.1.1.1.6.1.2
snmpwalk -v2c -c public <target> RAISECOM-NAT-MIB::natTypeMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.15.1.1.1.6.1.2.1
snmpget -v2c -c public <target> RAISECOM-NAT-MIB::natTypeMask.1

Start monitoring Raisecom gateway/CPE router or switch (NAT address mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-NAT-MIB::natTypeMask OID value, configure state conditions and alerts, and monitor any Raisecom gateway/CPE router or switch (NAT address mapping) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.15raisecomOptSysCommonRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.15.1optSysMgmtRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.15.1.1raisecomNatMIBRAISECOM-NAT-MIB
1.3.6.1.4.1.8886.15.1.1.1natDescRAISECOM-NAT-MIB
1.3.6.1.4.1.8886.15.1.1.1.6natTableRAISECOM-NAT-MIB
1.3.6.1.4.1.8886.15.1.1.1.6.1natEntryRAISECOM-NAT-MIB
1.3.6.1.4.1.8886.15.1.1.1.6.1.2natTypeMaskRAISECOM-NAT-MIB