All MIBs › RAISECOM-NAT-MIB › natType
natType
Module: RAISECOM-NAT-MIB
OID (symbolic): RAISECOM-NAT-MIB::natType
OID (numeric): 1.3.6.1.4.1.8886.15.1.1.1.6.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A Bit Mask documenting the NAT device's actual configuration according to natTypeMask above.
Its value may be one and only one of the options below: Basic-NAT(Bit 0) NAPT(Bit 1) Bi-directional-NAT(Bit 2) Twice-NAT(Bit 3) RSA-IP-Server(Bit 4) RSAP-IP-Server(Bit 5)
Bit 0, if set, indicates that Basic-NAT is configured. Bit 1, if set, indicates that NAPT is configured. Bit 2, if set, indicates that Bi-directional-NAT is configured. Bit 3, if set, indicates that Twice-NAT is configured. Bit 4, if set, indicates that RSA-IP-Server is configured. Bit 5, if set, indicates that RSAP-IP-Server is configured.
What is natType?
A deprecated bit mask (per RFC 2663) showing which single NAT mode is actually configured on this instance out of those natTypeMask says it supports, e.g. NAPT (bit 1) being set means the device is presently doing port-translating NAT rather than plain Basic-NAT.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.15.1.1.1.6.1.3 snmpwalk -v2c -c public <target> RAISECOM-NAT-MIB::natType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.15.1.1.1.6.1.3.1 snmpget -v2c -c public <target> RAISECOM-NAT-MIB::natType.1
Start monitoring Raisecom gateway/CPE router or switch (NAT address mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-NAT-MIB::natType OID value, configure state conditions and alerts, and monitor any Raisecom gateway/CPE router or switch (NAT address mapping) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.15 | raisecomOptSysCommon | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.15.1 | optSysMgmt | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.15.1.1 | raisecomNatMIB | RAISECOM-NAT-MIB |
| 1.3.6.1.4.1.8886.15.1.1.1 | natDesc | RAISECOM-NAT-MIB |
| 1.3.6.1.4.1.8886.15.1.1.1.6 | natTable | RAISECOM-NAT-MIB |
| 1.3.6.1.4.1.8886.15.1.1.1.6.1 | natEntry | RAISECOM-NAT-MIB |
| 1.3.6.1.4.1.8886.15.1.1.1.6.1.3 | natType | RAISECOM-NAT-MIB |