All MIBs › QOS-ACL-MIB › aclRuleDstIpv6Prefix
aclRuleDstIpv6Prefix
Module: QOS-ACL-MIB
OID (symbolic): QOS-ACL-MIB::aclRuleDstIpv6Prefix
OID (numeric): 1.3.6.1.4.1.7244.2.3.2.13.1.20
Node type: OBJECT-TYPE
Type: Ipv6AddressPrefix
Access: read-write
Description: The Ipv6 Prefix Address configured on the Service Port.
What is aclRuleDstIpv6Prefix?
The IPv6 prefix address configured on the service port that this ACL rule's destination must match, used together with aclRuleDstIpv6PrefixLength to define the matched destination network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.2.13.1.20 snmpwalk -v2c -c public <target> QOS-ACL-MIB::aclRuleDstIpv6Prefix
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7244.2.3.2.13.1.20.1 snmpget -v2c -c public <target> QOS-ACL-MIB::aclRuleDstIpv6Prefix.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7244.2.3.2.13.1.20.1 s <value>
Start monitoring Quanta data-center Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QOS-ACL-MIB::aclRuleDstIpv6Prefix OID value, configure state conditions and alerts, and monitor any Quanta data-center Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7244 | quanta | QUANTA-SWITCH-MIB |
| 1.3.6.1.4.1.7244.2 | switch | QUANTA-SWITCH-MIB |
| 1.3.6.1.4.1.7244.2.3 | qos | QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7244.2.3.2 | qosACL | QOS-ACL-MIB |
| 1.3.6.1.4.1.7244.2.3.2.13 | aclIpv6RuleTable | QOS-ACL-MIB |
| 1.3.6.1.4.1.7244.2.3.2.13.1 | aclIpv6RuleEntry | QOS-ACL-MIB |
| 1.3.6.1.4.1.7244.2.3.2.13.1.20 | aclRuleDstIpv6Prefix | QOS-ACL-MIB |