All MIBs › Printer-MIB › prtOutputMinDimFeedDir
prtOutputMinDimFeedDir
Module: Printer-MIB
OID (symbolic): Printer-MIB::prtOutputMinDimFeedDir
OID (numeric): 1.3.6.1.2.1.43.9.2.1.17
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The minimum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (controlled by prtOutputDimUnit, which uses PrtMediaUnitTC). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
NOTE: The above description has been modified from RFC 1759 for clarification and to explain the purpose of (-1) and (-2).
What is prtOutputMinDimFeedDir?
This object specifies the minimum paper or media dimension that the printer output sub-unit can reliably handle, measured parallel to the feed direction in printer-specific units. If the printer can sense this value, it is read-only; otherwise it is writable via management protocols. Print system operators use this to configure paper size constraints and ensure the printer handles media correctly for each output device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.9.2.1.17 snmpwalk -v2c -c public <target> Printer-MIB::prtOutputMinDimFeedDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.9.2.1.17.1 snmpget -v2c -c public <target> Printer-MIB::prtOutputMinDimFeedDir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.9.2.1.17.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Printer-MIB::prtOutputMinDimFeedDir OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| 1.3.6.1.2.1.43.9 | prtOutput | Printer-MIB |
| 1.3.6.1.2.1.43.9.2 | prtOutputTable | Printer-MIB |
| 1.3.6.1.2.1.43.9.2.1 | prtOutputEntry | Printer-MIB |
| 1.3.6.1.2.1.43.9.2.1.17 | prtOutputMinDimFeedDir | Printer-MIB |