All MIBs › Printer-MIB › prtOutputMaxDimXFeedDir
prtOutputMaxDimXFeedDir
Module: Printer-MIB
OID (symbolic): Printer-MIB::prtOutputMaxDimXFeedDir
OID (numeric): 1.3.6.1.2.1.43.9.2.1.16
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The maximum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (controlled by prtOutputDimUnit, which uses PrtMediaUnitTC). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
NOTE: The above description has been modified from RFC 1759 for clarification and to explain the purpose of (-1) and (-2).
What is prtOutputMaxDimXFeedDir?
This value reports (or, on bins without sensing hardware, lets an admin set) the maximum media width (the dimension perpendicular to the feed direction) that an output bin supports, in the units given by prtOutputDimUnit; -1 means other/no restriction, -2 means unknown. Management software checks this to confirm an output bin can physically accept wide-format output like tabloid sheets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.9.2.1.16 snmpwalk -v2c -c public <target> Printer-MIB::prtOutputMaxDimXFeedDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.9.2.1.16.1 snmpget -v2c -c public <target> Printer-MIB::prtOutputMaxDimXFeedDir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.9.2.1.16.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Printer-MIB::prtOutputMaxDimXFeedDir OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| 1.3.6.1.2.1.43.9 | prtOutput | Printer-MIB |
| 1.3.6.1.2.1.43.9.2 | prtOutputTable | Printer-MIB |
| 1.3.6.1.2.1.43.9.2.1 | prtOutputEntry | Printer-MIB |
| 1.3.6.1.2.1.43.9.2.1.16 | prtOutputMaxDimXFeedDir | Printer-MIB |