All MIBs › Printer-MIB › prtOutputMaxDimFeedDir
prtOutputMaxDimFeedDir
Module: Printer-MIB
OID (symbolic): Printer-MIB::prtOutputMaxDimFeedDir
OID (numeric): 1.3.6.1.2.1.43.9.2.1.15
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The maximum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (controlled by prtOutputDimUnit, which uses PrtMediaUnitTC). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
NOTE: The above description has been modified from RFC 1759 for clarification and to explain the purpose of (-1) and (-2).
What is prtOutputMaxDimFeedDir?
This specifies the maximum paper dimensions the output sub-unit supports along the feed direction, in the units defined by prtOutputDimUnit. It describes physical bin/tray constraints. An operator references this to select paper sizes the printer's output device can actually handle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.9.2.1.15 snmpwalk -v2c -c public <target> Printer-MIB::prtOutputMaxDimFeedDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.9.2.1.15.1 snmpget -v2c -c public <target> Printer-MIB::prtOutputMaxDimFeedDir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.9.2.1.15.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Printer-MIB::prtOutputMaxDimFeedDir OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| 1.3.6.1.2.1.43.9 | prtOutput | Printer-MIB |
| 1.3.6.1.2.1.43.9.2 | prtOutputTable | Printer-MIB |
| 1.3.6.1.2.1.43.9.2.1 | prtOutputEntry | Printer-MIB |
| 1.3.6.1.2.1.43.9.2.1.15 | prtOutputMaxDimFeedDir | Printer-MIB |