All MIBs › Printer-MIB › prtOutputMaxCapacity
prtOutputMaxCapacity
Module: Printer-MIB
OID (symbolic): Printer-MIB::prtOutputMaxCapacity
OID (numeric): 1.3.6.1.2.1.43.9.2.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The maximum capacity of this output sub-unit in output sub- unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
What is prtOutputMaxCapacity?
This OID stores the maximum number of sheets or units of media that the printer's output tray can hold before it's full. It indicates the physical limit of where printed pages are collected. A fleet manager checks this value to determine how often the output bin needs to be emptied in high-volume printing environments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.9.2.1.4 snmpwalk -v2c -c public <target> Printer-MIB::prtOutputMaxCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.9.2.1.4.1 snmpget -v2c -c public <target> Printer-MIB::prtOutputMaxCapacity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.9.2.1.4.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Printer-MIB::prtOutputMaxCapacity OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| 1.3.6.1.2.1.43.9 | prtOutput | Printer-MIB |
| 1.3.6.1.2.1.43.9.2 | prtOutputTable | Printer-MIB |
| 1.3.6.1.2.1.43.9.2.1 | prtOutputEntry | Printer-MIB |
| 1.3.6.1.2.1.43.9.2.1.4 | prtOutputMaxCapacity | Printer-MIB |