All MIBs › Printer-MIB › prtMarkerSuppliesMaxCapacity
prtMarkerSuppliesMaxCapacity
Module: Printer-MIB
OID (symbolic): Printer-MIB::prtMarkerSuppliesMaxCapacity
OID (numeric): 1.3.6.1.2.1.43.11.1.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The maximum capacity of this supply container/receptacle expressed in prtMarkerSuppliesSupplyUnit. If this supply container/receptacle can reliably sense this value, the value is reported by the printer and is read-only; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
What is prtMarkerSuppliesMaxCapacity?
This value represents the maximum amount of supply (ink, toner, paper, etc.) that a printer's consumable container or receptacle can hold, expressed in the units specified by the supply type. If the printer can detect this value automatically, it is read-only; otherwise, administrators can write the value to configure printer consumable capacity. Operators set this value to enable accurate remaining-supply calculations and automatic low-supply alerts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.11.1.1.8 snmpwalk -v2c -c public <target> Printer-MIB::prtMarkerSuppliesMaxCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.11.1.1.8.1 snmpget -v2c -c public <target> Printer-MIB::prtMarkerSuppliesMaxCapacity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.11.1.1.8.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Printer-MIB::prtMarkerSuppliesMaxCapacity OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| 1.3.6.1.2.1.43.11 | prtMarkerSupplies | Printer-MIB |
| 1.3.6.1.2.1.43.11.1 | prtMarkerSuppliesTable | Printer-MIB |
| 1.3.6.1.2.1.43.11.1.1 | prtMarkerSuppliesEntry | Printer-MIB |
| 1.3.6.1.2.1.43.11.1.1.8 | prtMarkerSuppliesMaxCapacity | Printer-MIB |