All MIBs › Printer-MIB › prtMarkerSuppliesLevel
prtMarkerSuppliesLevel
Module: Printer-MIB
OID (symbolic): Printer-MIB::prtMarkerSuppliesLevel
OID (numeric): 1.3.6.1.2.1.43.11.1.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is reported by the printer and is read-only; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. A value of (-3) means that the printer knows that there is some supply/remaining space, respectively.
What is prtMarkerSuppliesLevel?
This value reports (or, on supplies without a level sensor, lets an admin set) the current fill level of a supply container or remaining free space of a receptacle, in the units given by prtMarkerSuppliesSupplyUnit; -1 means other/no restriction, -2 means unknown, -3 means the printer only knows some supply or space remains without an exact figure. Monitoring dashboards poll this to trigger a low-toner alert, e.g. when a cartridge level drops below 10 percent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.11.1.1.9 snmpwalk -v2c -c public <target> Printer-MIB::prtMarkerSuppliesLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.11.1.1.9.1 snmpget -v2c -c public <target> Printer-MIB::prtMarkerSuppliesLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.11.1.1.9.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Printer-MIB::prtMarkerSuppliesLevel OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| 1.3.6.1.2.1.43.11 | prtMarkerSupplies | Printer-MIB |
| 1.3.6.1.2.1.43.11.1 | prtMarkerSuppliesTable | Printer-MIB |
| 1.3.6.1.2.1.43.11.1.1 | prtMarkerSuppliesEntry | Printer-MIB |
| 1.3.6.1.2.1.43.11.1.1.9 | prtMarkerSuppliesLevel | Printer-MIB |